[arm-allstar] It stopped so at first it seemed to be working other then it said the connection was rejected

[Doug Crompton]

Bill,

  One thing you have to remember is the 888 uses COS set to usb NOT
usbinvert. This is item J in simpleusb-tune-menu. The default on a new
system is usbinvert so you need to change that.  The timezone if you are in
eastern zone does not need to change otherwise you select a major city in
your zone and hit the space bar to mark it and then OK.

There is nothing wrong with starting over. just go into the menu, select
number 9 - start bash shell and at the prompt type  firsttime.sh
Answer you previously enter will be display for most items. If you need to
change it just do that. I usually suggest bypassing the simpleusb setup and
when it is done just enter the simpleusb-tune-menu from menu item 12. The
for the 888 select J and set to usb. Then you can setup your audio level
using item 2 and 3. If you made changes always select item w to save before
exiting the simpleusb-tune-menu.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, Aug 3, 2018 at 1:52 PM, "baanderson77 via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have a uri baofeng and pi 2 first the admin command would not let me
> change the time zone I figured that out. But now the simple usb quit and so
> did the cli and it doesn't announce my call sign anymore.Do I need to start
> over? Putty works and win scp my node is 48416
> ThanksBill
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>