[arm-allstar] Playnews-0.11

[Lloyd Duck]

Thanks, I'll double check that. At this point I'm looking everything over really good.

On Apr 30, 2018, at 10:57 PM, ""August Johnson via arm-allstar"" <arm-allstar at hamvoip.org> wrote:

Lloyd,
Make sure you don't have DTMF Muting enabled on the RC210. That would keep
your DTMF tones from going through.

August KG7BZ

On Mon, Apr 30, 2018 at 7:25 PM, "Lloyd Duck via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

Doug,

Thank you, I guess I'm not passing good dtmf codes from the repeater
through an RC210 controller into the node. I ran Asterisk CLI client to see
the dtmf codes and I only see this. Thinking I have something set wrong.

-- Received OK from Echolink server server3.echolink.org
-- Hungup 'DAHDI/pseudo-937225823'
-- Hungup 'DAHDI/pseudo-2082242416'
w5aw*CLI>

I'm able to do *976 and click on dtmf from Supermon and it works, but not
dtmf from a radio.


On Apr 29, 2018, at 10:10 PM, ""Doug Crompton via arm-allstar"" <
arm-allstar at hamvoip.org> wrote:

Lloyd,

You can't start the script with the NOW command as it requires a key press
to start. You could go in and eliminate the key press start in the script
for the NOW option. Commenting the "read -n 1" line by placing a # before
it should solve your problem.

echo "$NEWSTYPE news will start $TIME and use $MODE $MODETYPE mode on node
- $NODE"
echo -n "Press any key to start news..."
read -n 1


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*




On Sun, Apr 29, 2018 at 10:26 PM, "Lloyd Duck via arm-allstar" <
arm-allstar at hamvoip.org> wrote:


Doug or anyone,

I'm having trouble playing Amateur Radio Newsline by using dtmf, it never
starts playing.

976=cmd,/etc/asterisk/local/playnews-0.11 ARN now 42449 G &> /dev/null
2>&1 ;Newsline *976

I've been able to run it using crontab and from the command line with
./playnews_0.11 ARN now 42449.

With the command line has a part where the script stop till you "press any
key to start news".

else

echo "$NEWSTYPE news will start $TIME and use $MODE $MODETYPE mode on node
- $NODE"
echo -n "Press any key to start news..."
read -n 1
fi

Do I need to make a change to the script so I can use dtmf to start it?

Lloyd
W5LND
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org