[arm-allstar] IAXrpt

[Mike - W5JR]

If it’s not expressly defined in your rpt.conf, it is default defined to *99 (at least all of mine have been).  You can put in the “cop,6” line and change it to something else, adhering to all of the syntax rules for function code definitions. 

tnx
Mike / W5JR
Alpharetta GA


> On Apr 5, 2018, at 11:37 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> In the hamvoip releases this is defined as *99 - PTT enable  # - disable
> but could be changed if desired. You could also use VOX which works well if
> you can mute the mike such as in a car hands free with steering wheel mute.
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> 
> 
> 
> On Thu, Apr 5, 2018 at 11:32 PM, "Ken via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> For Zoiper (and the like) you need to define a DTMF function that keys up
>> the transmitter.
>> For example:
>> 88=cop,6        ; Phone TX key
>> 
>> I believe that pound (#) will drop the PTT unless you have redefined the
>> use of that key.
>> 
>> Ken
>> KE2N
>> 
>> 
>> -----Original Message-----
>> From: Lloyd Duck [mailto:lduck at me.com]
>> Sent: Thursday, April 05, 2018 8:14 PM
>> To: ARM Allstar <arm-allstar at hamvoip.org>
>> Cc: Ken <ke2n at cs.com>; David McGough <kb4fxc at inttek.net>
>> Subject: IAXrpt
>> 
>> I’m having an issue when dialing in with zoiper on an iPhone, i’m only
>> able to monitor only. I’m not able to transmit into the node.
>> 
>> Lloyd
>> W5LND
>> 
>> On Apr 5, 2018, at 7:07 PM, David McGough via arm-allstar <
>> arm-allstar at hamvoip.org> wrote:
>> 
>> 
>> No worries!
>> 
>> 
>>> On Thu, 5 Apr 2018, Ken wrote:
>>> 
>>> My bad,  I was actually replying from an earlier digest, where somehow I
>>> understood that you wanted a zero where the "CallerID" goes, not where
>> the
>>> "Caller Number" goes.    Zero for CallerID does not work (of course)
>>> ;-P
>>> 
>>> Ken
>>> 
>>> 
>>> 
>>> -----Original Message-----
>>> From: David McGough [mailto:kb4fxc at inttek.net]
>>> Sent: Thursday, April 05, 2018 7:52 PM
>>> To: Ken <ke2n at cs.com>
>>> Cc: arm-allstar at hamvoip.org
>>> Subject: Re: caller ID
>>> 
>>> 
>>> Ken,
>>> 
>>> I think that's the way I've got it???
>>> 
>>> The callsign is in the CallerID/Name field and a 0 (zero) in the number
>>> field???
>>> 
>>> 
>>> 73, David KB4FXC
>>> 
>>> 
>>> 
>>> 
>> 
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> 
>> 
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org