[arm-allstar] Iaxrpt testing and solution

[Tom Eaton]

I have tested with Android and PC and they both work fine just as they did
before the last update. Just wanted to give my input.

Tom, KC4CBQ

On Thu, Apr 5, 2018, 6:31 PM "David McGough via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
>
> Hi Everyone,
>
> Doug & I have spent the last hour+ testing all the scenarios we can think
> of related to the IaxRpt software. We found that the PC version of the
> software and the mobile device version function subtly differently in
> regard to CallerID info that gets passed to app_rpt.
>
> Ultimately, I think the issues are now worked-around in the new one-way
> audio test in app_rpt. I've placed an updated asterisk package in the
> repository, ready for download, that implements the solution.
>
> Now, the preferred IaxRpt configuration (whether PC or phone) is to have
> the CallerID (or name) field set to your callsign. And, have the number
> field set with a single 0 (zero)...For the PC version of the software,
> the fields would look like this:
>
> Name:  KB4FXC
>
> Number: 0
>
>
> Please give this a try-
>
> 73, David KB4FXC
>
>
>
> On Thu, 5 Apr 2018, Bryan St Clair wrote:
>
> > I was able to duplicate the drop in about 30 seconds on my node.
> >
> > Local LAN connection.  Confirmed newest version of hamvoip.  Checked for
> an
> > update and performed a full restart.
> >
> > CallerID Name has my callsign (all lower case) and node has 0  (number,
> not
> > the letter)
> >
> > I connected to another allstar (non hamvoip) node and it did not drop.  I
> > did notice one small difference on connection. (doubt it matters) but the
> > description of the connected node didn't show on the call line.  Yet the
> > other station did, as well as a second I tested.  A description is seen
> in
> > the config.
> >
> > On Thu, Apr 5, 2018 at 1:11 PM, "David McGough via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > >
> > > Hi Robert,
> > >
> > > I just duplicated what you're seeing. For me this condition shows up if
> > > the Options->Preferences->CallerID->Number: field is empty or blank.
> > >
> > > Make sure the CID number field is:
> > >
> > > Number: 0
> > >
> > > The number 0 (zero).
> > >
> > > 73, David KB4FXC
> > >
> > >
> > >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>