[arm-allstar] Allstar node and android-iaxrpt

Thu Apr 5 13:50:58 EST 2018

retried to connect, and yes, i was able to connect.  same ip as initial
attempt.

may have been delayed with updating it's IP?

[Apr  5 13:47:35] NOTICE[22360]: app_rpt.c:11358 connect_link: Mode:
Transceive
[Apr  5 13:47:35] NOTICE[22360]: app_rpt.c:11359 connect_link: Connection
type: Normal
[Apr  5 13:47:35] NOTICE[22360]: app_rpt.c:11500 connect_link: rpt (remote)
initiating call to IAX2/radio at 73.142.153.109:4569/46148 on
IAX2/73.142.153.109:4569-11164
[Apr  5 13:47:35] NOTICE[17838]: app_rpt.c:8503 wait_interval: Delay
interval = 2000
    -- Call accepted by 73.142.153.109 (format gsm)
    -- Format for call is gsm
[Apr  5 13:47:37] NOTICE[17838]: app_rpt.c:8507 wait_interval: Delay
complete
    -- Hungup 'DAHDI/pseudo-1327835464'
[Apr  5 13:47:38] NOTICE[17839]: app_rpt.c:8503 wait_interval: Delay
interval = 2000
[Apr  5 13:47:40] NOTICE[17839]: app_rpt.c:8507 wait_interval: Delay
complete
    -- <DAHDI/pseudo-663207994> Playing 'rpt/node' (language 'en')
    -- <DAHDI/pseudo-663207994> Playing 'digits/4' (language 'en')
    -- <DAHDI/pseudo-663207994> Playing 'digits/6' (language 'en')
    -- <DAHDI/pseudo-663207994> Playing 'digits/1' (language 'en')
    -- <DAHDI/pseudo-663207994> Playing 'digits/4' (language 'en')
    -- <DAHDI/pseudo-663207994> Playing 'digits/8' (language 'en')
    -- <DAHDI/pseudo-663207994> Playing 'rpt/connected' (language 'en')

On Thu, Apr 5, 2018 at 1:39 PM, "Fred Hillhouse via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Thank you David for your help and contact! That was exciting! My first node
> is functioning! This node is meant to be a path for a future radio-less
> mobile node for access to/from other nodes.
>
> Another plus, I learn how to reboot my router remotely. It doesn't have a
> reboot button but doing an "apply" on the basic settings page seems to do
> the trick.
>
> I connected at my office desk with my phone and the volume was higher than
> expected. I noticed I could not change the phone volume, but maybe that is
> an issue with iaxrpt. It disconnected me I think.
>
> I had my own node number  in the white field when I clicked "Send". If I
> load a remote node (ex. 41331) into the white field and click "Send", will
> it connect to the remote node through mine? This does assume the remote
> node
> is accepting connections.
>
> Thanks again!
>
> Best regards,
> Fred N7FMH
>
>
> -----Original Message-----
> From: David McGough [mailto:kb4fxc at inttek.net]
> Sent: Thursday, April 05, 2018 1:39 PM
> To: "Fred Hillhouse via arm-allstar"
> Cc: Fred Hillhouse
> Subject: Re: [arm-allstar] Allstar node and android-iaxrpt
>
>
> Hi Fred,
>
> I see similar results here--not able to connect.  Is your 46148 node behind
> a NAT router/firewall?? If so, in in-bound UDP port 4569 forwarded properly
> on the router?
>
> 73, David KB4FXC
>
>
> On Thu, 5 Apr 2018, "Fred Hillhouse via arm-allstar" wrote:
>
> > Thank you for attempting to connect.
> >
> > What can I learn from this besides the connection failed? This is new to
> me.
> >
> >
> >
> > Thanks!
> >
> >
> >
> > Best regards,
> >
> > Fred N7FMH
> >
> >
> >
> >
> >
> > From: Dan Keizer [mailto:ve4drk at gmail.com]
> > Sent: Thursday, April 05, 2018 12:56 PM
> > To: ARM Allstar
> > Cc: Fred Hillhouse
> > Subject: Re: [arm-allstar] Allstar node and android-iaxrpt
> >
> >
> >
> > I get the following from our hub at 47012:  failed connection.
> >
> >
> >
> > [Apr  5 11:54:57] NOTICE[22360]: app_rpt.c:11357 connect_link: Connect
> > attempt to node 46148
> >
> > [Apr  5 11:54:57] NOTICE[22360]: app_rpt.c:11358 connect_link: Mode:
> > Transceive
> >
> > [Apr  5 11:54:57] NOTICE[22360]: app_rpt.c:11359 connect_link:
> > Connection type: Normal
> >
> > [Apr  5 11:54:57] NOTICE[22360]: app_rpt.c:11500 connect_link: rpt
> > (remote) initiating call to IAX2/radio at 73.142.153.109:4569/46148 on
> > IAX2/73.142.153.109:4569-12450
> >
> > [Apr  5 11:54:57] NOTICE[16380]: app_rpt.c:8503 wait_interval: Delay
> > interval = 2000
> >
> > [Apr  5 11:54:59] NOTICE[16380]: app_rpt.c:8507 wait_interval: Delay
> > complete
> >
> >     -- Hungup 'DAHDI/pseudo-771008300'
> >
> > [Apr  5 11:55:01] NOTICE[22343]: chan_iax2.c:4071 __auto_congest:
> > Auto-congesting call due to slow response
> >
> >     -- Hungup 'IAX2/73.142.153.109:4569-12450'
> >
> > [Apr  5 11:55:03] NOTICE[16382]: app_rpt.c:8503 wait_interval: Delay
> > interval = 2000
> >
> >     -- Hungup 'DAHDI/pseudo-490635301'
> >
> > [Apr  5 11:55:05] NOTICE[16382]: app_rpt.c:8507 wait_interval: Delay
> > complete
> >
> >     -- <DAHDI/pseudo-1208486018> Playing 'rpt/node' (language 'en')
> >
> >     -- <DAHDI/pseudo-1208486018> Playing 'digits/4' (language 'en')
> >
> >     -- <DAHDI/pseudo-1208486018> Playing 'digits/6' (language 'en')
> >
> >     -- <DAHDI/pseudo-1208486018> Playing 'digits/1' (language 'en')
> >
> >     -- <DAHDI/pseudo-1208486018> Playing 'digits/4' (language 'en')
> >
> >     -- <DAHDI/pseudo-1208486018> Playing 'digits/8' (language 'en')
> >
> >     -- <DAHDI/pseudo-1208486018> Playing 'rpt/connection_failed'
> > (language 'en')
> >
> >     -- Hungup 'DAHDI/pseudo-1208486018'
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > On Thu, Apr 5, 2018 at 11:51 AM, "Fred Hillhouse via arm-allstar"
> <arm-allstar at hamvoip.org> wrote:
> >
> > Greetings,
> >
> >
> >
> > I have my 46148 node, with no radio, running and am attempting to do
> > something with iaxrpt. I think I am correct in assuming I can
> > eventually use iaxrpt to connect to my 46148 node and then connect to
> another node.
> >
> >
> >
> > http://stats.allstarlink.org/nodeinfo.cgi?node=46148
> >
> >
> >
> > Can anyone connect to it?
> >
> >
> >
> > I changed the RPi to a static address and configured my router to
> > forward to port 4569 UDP. I am curious what happens if my ISP changes
> > my IP address. It seems like I have to update iaxrpt if that happens.
> > Either that or set up a DNS alias?
> >
> >
> >
> > I modified iax.conf and entensions.conf per iaxrpt-config.pdf. I
> > assumed this had to be done on the RPi since that is where I found the
> files.
> >
> >
> >
> > In iaxrpt, I see the following. Do I need to create another node just
> > for it?
> >
> > Registration: Not registered
> >
> > Node: Not connected
> >
> >
> >
> > In iaxrpt, I tried the *346148 and nothing happened. I have no idea
> > what to expect. So I know I have missed some important points. Please
> assist!
> >
> >
> >
> > Thanks!
> >
> >
> >
> > Best regards,
> >
> > Fred N7FMH
> >
> >
> >
> > ---
> > This email has been checked for viruses by Avast antivirus software.
> > https://www.avast.com/antivirus
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>