[arm-allstar] Two Node System - One node connects, second node does not.
Lloyd Duck
lduck at me.com
Thu Apr 5 11:31:17 EST 2018
Thanks Doug, for the information and explanation. I had done the same thing on mine a while ago and it took help to get it working.
Lloyd
W5LND
On Apr 5, 2018, at 11:14 AM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
Randy,
I fixed the problem on your server but I also wanted to let others know
how this was resolved. I tried to call you on your node but you were not
around. You made a mistake that others might make also and I wanted to show
others how this was resolved in case they have the same problem.
Every node defined in rpt.conf needs to have a functions stanza (and all
others shown below) so the commands on that node are defined. Typically we
use stanza's of the first node for all nodes but you can use a separate
stanza for each node and define them separately.
In your case you created a second node to replace node 1999 but you also
renamed all the mapping to the second node and they did not exist. Below is
what I did. I changed all of the mappings in the node 28706 node to point
to the 28705 node since you had not created any new ones for 28706. If you
do in fact want different functions, macros, wait times etc. for these two
nodes then you would have to define a new stanza with the new commands
like [functions=finctions28706] etc.
; Context mapping
controlstates=controlstates
; Defines groups of control operator
commands
; to be executed all at once. Can be
combined
; with macros to allow changes to a nodes
; operating mode to be made quickly.
scheduler=schedule28705
; Defines macros to be executed at a
specific
; time and date. Uses a cron-like syntax
morse=morse28705
; Contains definitions for morse code
messages.
; One common morse stanza is shared across
; multiple nodes
macro=macro28705
; Defines DTMF macro sequences
functions=functions28705
; Defines DTMF function digit sequences. A
; function stanza has a reference to it
defined
; inside a node stanza. Multiple function
stanzas
; may be defined and used to provide
different
; function lists for different sources
; (radio.phone, and link)
phone_functions=functions28705
link_functions=functions28705
telemetry=telemetry
; Contains definitions for telemetry tones
; (courtesy tones, roger beeps, etc). A
telemetry
; stanza has a reference to it defined
inside
; a node stanza.
wait_times=wait-times28705
; Contains time delays used to time audio
; telemetry events
An easy way to do this when creating a second node is when you define the
first node in setup the second 1999 node gets all these defined as the
first node. Then when you come along later and change all 1999 to the new
second node number it will not change the mappings for the second node as
they have already been changed. Using nano with the "control \" option
makes this easy.
Also remember whenever you change anything in the config files you need to
either reload them or restart asterisk.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Wed, Apr 4, 2018 at 7:17 AM, "Randy Neals via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> Hi there,
>
> I just upgraded my Raspberry Pi to the latest April 2 code using the menu
> system.
>
> The second node on the system (28706) works normally.
> The first node on the system (28705) doesn't want to connect to anything.
>
> First I checked the Registration Status.
>
>
> VE3RTR1*CLI> iax2 show registry
>
> Host dnsmgr Username Perceived Refresh
> State
>
> 67.215.233.178:4569 Y 28706 72.142.152.114:4569
> 60
> Registered
>
> 67.215.233.178:4569 Y 28705 72.142.152.114:4569
> 60
> Registered
>
>
> Then I turned on Asterisk debug @ level 7 and tried a connection with the
> not working node, and then the working node to compare the debug output.
>
>
> VE3RTR1*CLI> rpt fun 28706 *328700
>
> [Apr 4 07:04:04] NOTICE[431]: app_rpt.c:2838 cancel_pfxtone:
> cancel_pfxfone!![Apr 4 07:04:04] NOTICE[431]: app_rpt.c:11292
> collect_function_digits: digits=3 source=0
>
>
> <Nothing further, prompt returns>
>
>
> VE3RTR1*CLI> rpt fun 28705 *328700
>
> [Apr 4 07:04:13] NOTICE[430]: app_rpt.c:2838 cancel_pfxtone:
> cancel_pfxfone!![Apr 4 07:04:13] NOTICE[430]: app_rpt.c:11292
> collect_function_digits: digits=3 source=0
>
> [Apr 4 07:04:13] NOTICE[430]: app_rpt.c:11364 collect_function_digits:
> rv=0
>
> [Apr 4 07:04:13] NOTICE[430]: app_rpt.c:2838 cancel_pfxtone:
> cancel_pfxfone!![Apr 4 07:04:14] NOTICE[430]: app_rpt.c:11292
> collect_function_digits: digits=32 source=0
>
> [Apr 4 07:04:14] NOTICE[430]: app_rpt.c:4087 node_lookup: Starting node
> lookup: node = 2
>
> [Apr 4 07:04:14] NOTICE[430]: app_rpt.c:4071 nodes_stanza_node_lookup: Not
> found in nodes stanza: node = 2
>
> [Apr 4 07:04:14] NOTICE[430]: app_rpt.c:4016 flat_nodelist_node_lookup:
> Looking for rpt_extnodes! filename = /var/lib/asterisk/rpt_extnodes
>
> [Apr 4 07:04:14] NOTICE[430]: app_rpt.c:11364 collect_function_digits:
> rv=0
> <Debug continues and node connects>
>
> Q. Any suggestion as to what I should check next?
>
> Thanks,
> Randy
> W3RWN
> Seattle, WA
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2/3 web page - http://hamvoip.org
More information about the arm-allstar
mailing list