[arm-allstar] Link to a node for x minutes then disconnect

[Jay Urish]

Small topic hijack.

Doug, You are incorrect.

copied from - http://www.repeater-builder.com/tech-info/weather-radios.html

see section -- Weather Receiver Rebroadcasts and the Legal Questions




As to what can be rebroadcast, Dan directed me to Part 97.113(e) which 
reads:

    "No station shall retransmit programs or signals emanating from any
    type of radio station other than an amateur station, except
    propagation and weather forecast information intended for use by the
    general public and originated from United States Government stations
    and communications, including incidental music, originating on
    United States Government frequencies between a space shuttle and its
    associated Earth stations." 


On 04/04/2018 09:57 AM, "Doug Crompton via arm-allstar" wrote:
> Stephen,
>
>     It is not legal to rebroadcast NOAA weather on amateur radio. That rule
> has been in existence for quite some time. Otherwise what you want to do
> could probably be accomplished through a script timing the various
> scenarios.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Wed, Apr 4, 2018 at 10:00 AM, "Stephen - K1LNX via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Before I potentially re-invent the wheel, I wondered if something like this
>> exists in the app_rpt code.
>>
>> I have a dedicated channelized remote base node and steer it with the BCD
>> control script. I put our local NOAA weather radio in one of the channels,
>> and would like the ability to call it up "on-command" for audio.
>>
>> Ideally, I'd like to call a function that will:
>>
>> - change channels to my pre-defined WX channel in the CDM radio via the BCD
>> script
>> - Playback audio for 2-3 minutes
>> - change back to my "default" channel after the timer has elapsed and
>> disconnect
>>
>> Unless I've missed it, I don't see a function in app_rpt to facilitate this
>> behavior? So that left me thinking of options, and I am looking to see if
>> anyone has any other ideas:
>>
>> - use my controller (SCOM 7330) to send a DTMF command to call a script,
>> run on a timer, then send another DTMF command to disconnect it (this would
>> be easiest, but my preferred use to call scripts and functions is to use
>> MDC instead which the SCOM does not support)
>>
>> - write a shell or python script to handle this
>>
>> - hack something together in the dialplan, I think I might be able to
>> leverage the autopatch function for this, but haven't looked into it yet.
>>
>> Looking for ideas if anyone has any, and perhaps I'm overthinking this
>> which I'm known to do on occasion ;)
>>
>> 73
>> Stephen
>> K1LNX
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org