[arm-allstar] Registering with Allstar Server

[David McGough]

Hi Josh,

Sending data to the stats server is turned off, by default. To enable 
sending status info, you must edit the /etc/asterisk/rpt.conf file. Each 
node stanza must have a couple statements like:

statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.hamvoip.org/logparams.php ; Status updates

...And, make sure they are not commented out with a leading semicolon.

To simply confirm that your node is Registered, from the Asterisk CLI 
(admin menu option #11) run this command:

AllStar-live*CLI> iax2 show registry 
Host                  dnsmgr  Username    Perceived             Refresh  State
67.215.233.178:4569   N       2290        12.17.29.168:4569          60  Registered

Note that the "Username" is your node number and the "State" should be
"Registered"

73, David K4FXC




On Tue, 19 Sep 2017, "Josh Hatton via arm-allstar" wrote:

> I have a Allstar Pi that is not showing up in the Allstar Stats page.
> Fresh install to SD.  Followed prompts to enter my information, passwords,
> callsign etc.  How can I tell the Pi has successfully connected to the
> server and registered?
> 
> Josh W4ZZK
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>