[arm-allstar] second node installed on same ip address

Doug Crompton wa3dsp at gmail.com
Mon Sep 18 17:26:37 EST 2017


  It looks like you did change the port at allstarlink.org for the second
node. Here is how they show up here -

41971=radio at,

46532=radio at,

In order to diagnose we need more info as it could be so many things. dtmf
not working? nodes not downloading? etc.

What does it do when you try to connect out to a valid node? If you go into
the client from the main menu you can see your dtmf being sent and the
response. Do you have a /tmp/rpt_extnodes file?

Remember unless your router has hairpin loopback you cannot connect the
nodes together without putting specific routing in rpt.conf to each other.
In that case see this howto at the hamvoip.org web page -


*73 Doug*


*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Sep 18, 2017 at 4:29 PM, "ku6v via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I installed a second node on the same ip address with a different bind
> port.
> I cannot get the second node to make or accept calls. It does show up as
> being online and in green.
> What did I do this time?  I did look at my working node 41971
> extensions.conf for differences but did not see anything obvious. The
> second
> node is 46532.
> 73
> Don
> KU6V
> _______________________________________________
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

More information about the arm-allstar mailing list