[arm-allstar] Baofeng 888 programming problem
Doug Crompton
wa3dsp at gmail.com
Tue Oct 31 22:43:55 EST 2017
I want to point out that there is a potential programming problem with the
Baofeng 888 that has cropped up. On certain radios while the frequencies
can be programmed the voice prompts cannot be turned off. In a recent batch
of 20 fully 10 could not be programmed to turn off the voice prompts. There
is a selection there and it can be checked but it does not stick. It is
imperative that voice prompts be turned off if these radios are used as a
node radio (connected to the FOB) as these prompts will go out over the
air. Because of this I would recommend not buying the 888 as a node radio
at this time unless you want to take a chance that you might get one that
works. DO NOT use one as a node radio that you cannot turn the voice
prompts off. No one wants to hear that on a multi-node connected Allstar
network. A better choice at this time might be the UV82 which is a better
radio and dual band. Modification details for the UV82 are on the
hamvoip.org web page.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
More information about the arm-allstar
mailing list