[arm-allstar] Raspberry pi won't boot

[laussana]

Hello Doug
Thanks for your prompt response. 
I just found out it was the PI Power supply , I thought it was good because I could see the green and red leds were blinking, but then kind of a high pitched very low sound. I connected the PI to the PC usb port on the PC ,  and now all looks fine, quite a coincidence that the PS went bad at power down .

Jorge HK4CZE

Enviado desde Correo para Windows 10

De: Doug Crompton via arm-allstar 
Enviado: Monday, October 23, 2017 9:23 AM
Para: ARM Allstar
CC: Doug Crompton
Asunto: Re: [arm-allstar] Raspberry pi won't boot

Jorge,

  Well if you used the menu then the shutdown procedure was correct and
even if you had shut it down by just pulling the power 99 times out of a
100 it would not cause a problem. Try removing and reinserting the SD card.
If the green light does not come on or comes on briefly and goes off  and
does not return you probably have a bad SD card. If you have another card
try reburning the image to it and see if it boots. This would check
everything else.

Unless you have made lots of changes it is very easy to just go through the
setup again on a new image. You just need your node number and node (6
digit) password. It is easier to do that than trying to recover a card.

Having a system not boot that did before is a rare occurrence but it can
happen. Make sure you are using a quality SD card. Sandisk Ultra
recommended - no clones!


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Mon, Oct 23, 2017 at 8:57 AM, "Jorge Mejia P via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello
> Yesterday I wanted to reset my Asterisk but did it from the "shut system
> down" menu instead (don't remember the exact name for this option think
> it's the last one on the manager menu).
> Now I reconnect the ps to the PI but don't get the Ethernet led neither do
> I get any leds lit on the Urix. Consequently there is no way to log into
> the server with putty.
> Looks like video ,usb , network or wi fi are not coming back
> Wonder if there is a way to get the system going or if it is a hardware
> failure..
>
> Would appreciate some suggestions.
> Thank you
>
> Jorge hk4cze
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org