[arm-allstar] Programming Motorola Radios on a hamvoip installation

[Fred Hillhouse]

If Amazon is your drug of choice:
https://www.amazon.com/Programming-Cable-Motorola-Maxtrac-CDM1250/dp/B01M74S
RDZ/ref=sr_1_5?ie=UTF8&qid=1510928560&sr=8-5&keywords=Programming+Cable+For+
Motorola+Radius+Maxtrac+GM300+M1225+CDM1250+CM200+CM300&dpID=41nhsqxfCBL&pre
ST=_SY300_QL70_&dpSrc=srch


-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via arm-allstar"
Sent: Friday, November 17, 2017 1:09 AM
To: ARM Allstar
Cc: Doug Crompton
Subject: [arm-allstar] Programming Motorola Radios on a hamvoip installation

We have deployed another value add to the hamvoip code, the ability to
program the older Motorola radios like the Maxtrac , GM300 etc. on your Pi
allstar server. This makes available the ability for the average person to
program these radios without having to find someone that has an old computer
and the software to do it. It also is a consistent platform so if it works
on one Pi it will work on all. No more hassling with timings, etc.
Complete details are in the link to the howto posted on the hamvoip.org web
page in the howto/software section. Here is the direct link -

https://hamvoip.org/hamradio/motorola_programming/

If you use the hardware suggested and set it up according to the directions
you should be able to program your Motorola radio that previously required
an old DOS computer..


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus