[arm-allstar] All star not responding

[Doug Crompton]

Kerry,

COS is required. What Icom transceiver are you using? Most radios including
commercial like Motorola have provision for a COS signal.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Mon, Nov 13, 2017 at 3:55 AM, "Kerry McKenzie via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi Doug
> thanks for your reply .......
> Ok first the COS
> there is no provision on my radio for COS
> And second there is no COS on the URiX controller
> So you guessed it I havent used it just PTT
>
> These are the connections to the URiX
> Pin 1 PTT
> Pin 21 Mic AC
> Pin 22 Left out
> Pin 20 Ground
>
> Using the V command I get the following
>
>     COS        |   COS   |  COS   |  CTCSS    |   CTCSS    |  PTT
> (composite) | (input)   | (test)   | (input)        | (override)  |
>    KEYED    |  KEYED | CLEAR | IGNORE  |   CLEAR    | CLEAR
>
> Now none of my commercial radios have COS either and none of the ham radios
> I own, so I afraid I am quite lost as to how or where this could be
> connected?
>
> Or am I missing something here?
>
> regards Kerry
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>