[arm-allstar] Connect OUT but not IN

[Doug Crompton]

Dave,

 My guess is you have no extension entry for the private node in
extensions.conf. In this case the client is your friend. Open a client
screen -  asterisk -rvvv - and monitor it when you connect from one to the
other obviously only one at a time. See what the error messages say.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*




On Sun, Nov 5, 2017 at 3:48 PM, "David via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have an RPi3 server running V1.5 with two nodes.  The main node is
> connected to a repeater and is private.  The second node is registered and
> is configured as pseudo.
> Using Supermon I can connect the private node to the registered node but
> not the other way.
> This is also true connecting to other private nodes outside of my LAN,
> that is, this one private node only connects going OUT to other nodes.  I
> believe I understand how private nodes are configured since I have others
> connecting just fine going IN or OUT.
>
> How is it that connection between two nodes on the same server can only be
> initiated from one of them?
>
> I don't see any errors on the Asterisk or Linux logs after the connect
> attempt fails.
> -David
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>