[arm-allstar] simpleusb

[Doug Crompton]

Jeff,

  Keep in mind it is usually always the output audio (from you) that is
distorted so you would not hear it and most people are so use to crap
digital audio that would think it was great and not tell you. I am
particular and I can pick it out just by sound.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Tue, May 30, 2017 at 10:24 PM, "Jeff Carlyle KD0QCN via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi Doug,
>
> Thanks for the tip on usbradio, I may play with it and see what it sounds
> like.  Ideally, I would like to simpleusb but we are to the point that I
> have to run a PL tone and don't really want to buy a tone board if
> something
> is on the horizon.  Hopefully the audio is good enough to get me by until
> the new driver is ready.  Thanks for all you do!
>
> Jeff KD0QCN
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Tuesday, May 30, 2017 9:15 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] simpleusb
>
> Hi Jeff,
>
>   Well no promises on when but it is coming.Tone boards are not a big deal
> especially if you have discriminator audio out which you would need anyway
> for usbradio. If you are in a hurry your might consider it. I am not saying
> don't do usbradio but just understand that it has it share of problems the
> worst of which is audio distortion. I would go with the tone board but if
> you do decide to try it definitely use turbo mode with proper cooling.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Tue, May 30, 2017 at 9:33 PM, "Jeff Carlyle KD0QCN via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hi All,
> >
> >
> >
> > Was just wondering if there is any news on the usbradio/simpleusb
> re-write?
> > I have a radio that will not do PL tones natively and would like
> > Allstar to handle that.  I have considered using usbradio to do this,
> > but all the comments I've read on this say don't it, that the audio is
> > not good.  I don't want to add a tone board to this setup.  Thanks to
> > all the Devs that are putting in all the work to make Allstar the awesome
> software it is.
> >
> >
> >
> > 73,
> >
> > Jeff - KD0QCN
> >
> >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>