[arm-allstar] Monitoring of my system.

C B harvard5362 at yahoo.com
Tue May 30 15:29:46 EST 2017 

Thanks
already using allmon2, works good.
please see below example 1 is for each node showing its connected sites. Example 2 is how i would like it to look. just all of my nodes (note the cut and paste did not go well the columns did not align though.
I have only 2 sites left and then all of my dying RLC DSP404"s will have been replaced with PI3's. I used your recommendation and each repeater has its own PI3
Chris

| Node 29883 - N6LXX N6LXX HUB BURBANK,CA Bubble Chart |
| Node | Node Information | Received | Link | Direction | Connected | Mode |
| 29913 | N6LXX 447.875 DENVER | 000:00:08 | ESTABLISHED | IN | 117:53:52 | Transceive |
| 2066 | KE6PCV 445.220- Corona, CA | 000:11:15 | ESTABLISHED | IN | 04:56:42 | Transceive |
| 43815 | N6LXX/R WILSON HUB | 000:20:09 | ESTABLISHED | IN | 64:06:59 | Transceive |
| 42155 | WB6FYR 224.920 -1.6 Flint Peak, Glendale, CA | 018:20:28 | ESTABLISHED | OUT | 89:56:19 | Transceive |



| Node 43815 - N6LXX/R WILSON HUB Bubble Chart |
| Node | Node Information | Received | Link | Direction | Connected | Mode |
| 29883 | N6LXX N6LXX HUB BURBANK,CA | 000:00:09 | ESTABLISHED | OUT | 76:30:41 | Transceive |
| 27008 | N6LXX 440 OAT MTN CALIF | 000:20:10 | ESTABLISHED | IN | 76:27:44 | Transceive |
| 43812 | N6LXX/R 53.62 - HARVARD | 000:27:20 | ESTABLISHED | IN | 88:36:55 | Transceive |
| 43816 | N6LXX BLUE RIDGE | 000:53:25 | ESTABLISHED | IN | 45:43:37 | Transceive |
| 43818 | N6LXX/R Sunset | 001:24:47 | ESTABLISHED | IN | 48:13:32 | Transceive |
| 43814 | N6LXX/R 927.5625 - HARVARD | 003:28:26 | ESTABLISHED | IN | 88:36:55 | Transceive |
| 1121 |   | 023:46:47 | ESTABLISHED | IN | 88:36:54 | Transceive |
| 43820 | N6LXX 53.56 -0.5 OAK GLEN, CA | Never | ESTABLISHED | IN | 11:37:48 | Transceive

 |


Exampel 2
|  Node

  |  Node Information

  |  Received

  |  Link

  |  Direction

  |  Connected

  |  Mode

  |
|  29913

  |  N6LXX 447.875 DENVER

  |  000:00:08

  |  ESTABLISHED

  |  IN

  |  117:53:52

  |  Transceive

  |
|  2066

  |  KE6PCV 445.220- Corona, CA

  |  000:11:15

  |  ESTABLISHED

  |  IN

  |  04:56:42

  |  Transceive

  |
|  43815

  |  N6LXX/R WILSON HUB

  |  000:20:09

  |  ESTABLISHED

  |  IN

  |  64:06:59

  |  Transceive

  |
|  42155

  |  WB6FYR 224.920 -1.6 Flint Peak, Glendale, CA

  |  018:20:28

  |  ESTABLISHED

  |  OUT

  |  89:56:19

  |  Transceive

  |


 

|  
 |  |  |  |  |  |   |
|  27008

  |  N6LXX 440 OAT MTN CALIF

  |  000:20:10

  |  ESTABLISHED

  |  IN

  |  76:27:44

  |  Transceive

  |
|  43812

  |  N6LXX/R 53.62 - HARVARD

  |  000:27:20

  |  ESTABLISHED

  |  IN

  |  88:36:55

  |  Transceive

  |
|  43816

  |  N6LXX BLUE RIDGE

  |  000:53:25

  |  ESTABLISHED

  |  IN

  |  45:43:37

  |  Transceive

  |
|  43818

  |  N6LXX/R Sunset

  |  001:24:47

  |  ESTABLISHED

  |  IN

  |  48:13:32

  |  Transceive

  |
|  43814

  |  N6LXX/R 927.5625 - HARVARD

  |  003:28:26

  |  ESTABLISHED

  |  IN

  |  88:36:55

  |  Transceive

  |
|  1121

  |   

  |  023:46:47

  |  ESTABLISHED

  |  IN

  |  88:36:54

  |  Transceive

  |
|  43820

  |  N6LXX 53.56 -0.5 OAK GLEN, CA

  |  Never

  |  ESTABLISHED

  |  IN

  |  11:37:48

  |  Transceive

  |





      From: Doug Crompton via arm-allstar <arm-allstar at hamvoip.org>
 To: ARM Allstar <arm-allstar at hamvoip.org> 
Cc: Doug Crompton <wa3dsp at gmail.com>
 Sent: Tuesday, May 30, 2017 11:49 AM
 Subject: Re: [arm-allstar] Monitoring of my system.
   
Chris,

 First of all congratulations on all those nodes! Have you tried supermon
or allmon2. Both would show the currently transmitting node. I think one
screen would get very busy for the number of nodes you have though. Based
on the complexity of your system it is a little hard to understand exactly
what you want to do.

I suspect you need to have all or many of those nodes report back to one
location. I would defer to Paul KN2R on this since he authored supermon and
I think he monitors many nodes himself.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, May 30, 2017 at 1:51 PM, "C B via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi
> Sorry if this has been asked before.
> I am looking for a way to see all of my connected nodes to see which
> repeater (node) the incoming signal  comes from. This is handy for may
> things including troubleshooting.
> In the beginning I connected all of my to one hub node, this allowed me to
> easily see which repeater (node) any incoming signal came from.
> at this point I have more than 25 (pi3) nodes up (on my way to about 40)
> and permanently connected, thus connecting all to one node considering the
> way my system is connected did not make a lot of sense.
> as the system is connected primarily by microwave site to site, it seemed
> to be more logical the sites that have  more than one repeater to have a
> HUB node at the site connecting all of the repeaters at that site together
> then connecting to the next site.
> with the old method if the microwave failed, each site wood no longer be
> linked to repeaters at the same site or to sites that still had
> connectivity.
> this method seems to be better with respect to linking, however it is not
> as good for monitoring with allmon2. signals can be traced back  by looking
> at the main Hub Node then seeing what sub-hub node it cam from and trace it
> back. While this is works with watching during normal times, it does not
> allow to see things quickly as it was when all connected to one hub node.
> is there a way to list all of my nodes on one screen similar to when i
> have all connected to one hub node to watch activity with existing tools?
> (grouped nodes to dose not provide a good screen)
> If not would it be possible for me  to modify something to do this?
> on the simple usb tune menu command "v" provides other useful information
> that would be nice to see for all of my nodes at once, is there anything
> available that does that?
> Thank you
> Chris
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

More information about the arm-allstar mailing list