[arm-allstar] Echolink Connection Telemetry

[Sean McCarthy]

Here is a few entries from my connection log:

Sat May 27 19:00:44 EDT 2017 == 43732 Connected EchoLink 3335524 ==>
KE7FHN EchoLink 335524 (107.23.146.139)
Sat May 27 19:01:30 EDT 2017 == 43732 Disconnected EchoLink 3335524
==> No-Info... EchoLink 335524
Sat May 27 19:01:39 EDT 2017 == 43732 Connected EchoLink 3053351 ==>
No-Info... EchoLink 53351
Sat May 27 19:09:20 EDT 2017 == 43732 Disconnected EchoLink 3053351
==> No-Info... EchoLink 53351
Sat May 27 19:36:09 EDT 2017 == 43732 Connected EchoLink 3053351 ==>
No-Info... EchoLink 53351
Sat May 27 19:59:26 EDT 2017 == 43732 Disconnected EchoLink 3053351
==> No-Info... EchoLink 53351
Sat May 27 20:16:14 EDT 2017 == 43732 Connected EchoLink 3765887 ==>
No-Info... EchoLink 765887
Sat May 27 20:17:42 EDT 2017 == 43732 Disconnected EchoLink 3765887
==> No-Info... EchoLink 765887
Sat May 27 20:20:54 EDT 2017 == 43732 Connected EchoLink 3111276 ==>
No-Info... EchoLink 111276
Sat May 27 20:22:20 EDT 2017 == 43732 Disconnected EchoLink 3111276
==> No-Info... EchoLink 111276
Sat May 27 21:31:39 EDT 2017 == 43732 Connected EchoLink 3501912 ==>
No-Info... EchoLink 501912
Sat May 27 21:31:58 EDT 2017 == 43732 Disconnected EchoLink 3501912
==> No-Info... EchoLink 501912
Sat May 27 21:35:23 EDT 2017 == 43732 Connected EchoLink 3685739 ==>
RV9CN EchoLink 685739 (137.226.114.33)
Sat May 27 21:35:28 EDT 2017 == 43732 Disconnected EchoLink 3685739
==> RV9CN EchoLink 685739 (137.226.114.33)

The 2 that appear correct, KE7FHN and RV9CN were me.

Debugging at the CLI shows the correct call, so I know I'm receiving the
correct information

-- new CALL=WX8L,ip=107.23.146.140,name=        Sean
    -- Executing [43732 at radio-secure:1] Rpt("echolink/el0-8", "43732") in
new stack
  == Spawn extension (radio-secure, 43732, 1) exited KEEPALIVE on
'echolink/el0-8'

And pointers would be appreciated...


On Sat, May 27, 2017 at 12:11 PM, Sean McCarthy <smccarthy61 at gmail.com>
wrote:

> Hello all,
>
> I have echolinking working well on my node, however, the incoming
> connections are either completely wrong or show "no-info" and do not
> announce on the node.
>
> Anyone know what I might have done wrong?
>
> Thanks,
> Sean
>