[arm-allstar] kerchunk fliter

[Doug Crompton]

Chris,

The best thing to do is to find out who is doing it and get them to stop.
You can see who is keying on the network using allmon2 or supermon. In that
case you could just disconnect the offending node and eventualy they might
get the idea. If it is coming in RF on your simplex node or repeater then
you would have to DF to find out who they were.

If it is coming in on your simplex or repeater receiver you can also set
the rxondelay in simpleusb-tune-menu. This delays COS in 20ms steps, so a
value of 5 would be 100ms. The problem is if you make this too long you
will miss a portion of the first word of someone actually saying something
especially for those who don't delay a bit after they key.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, May 26, 2017 at 8:01 PM, "C B via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> HI
> is there a timer i can change that would increase the time needed for the
> COS to be active for in order to make a kerchunk filter?
> Thank you
> Chris
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org