[arm-allstar] Connection Results

[Bryan St Clair]

Thank you Doug,

In iax.conf I have a password for the 1 user account. I double checked your
howto to make sure more conf wasn't needed.  But I do see other user type
settings in iax.conf. I never touched them, but I assume [radio] and
[allstar-sys] and [allstar-public] were to be left as is.

I never shared my node password, but I will request it changed, to be safe.

I disabled web transceiver and phone on allstar.org.  Also changed my main
allstar.org login password.

Any other suggestions I should complete to make sure I am secure?


On Mon, May 15, 2017 at 11:04 PM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Bryan,
>
>  Both phone and iaxrpt connections are under your control requiring
> authentication. Phone requires a PIN number only issued to you which is
> viewable at allstarlink.org under account settings.  iaxrpt is setup by
> you
> locally with user/pass so it is under your control. The web transceiver is
> open to anyone connecting unless you disallow it at allstarlink.org in
> node
> configuration access settings. The phone portal can be turned off also
> although no one could connect there unless they knew your PIN.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Tue, May 16, 2017 at 1:26 AM, "Bryan St Clair via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hello,
> >
> > In my connection log, I am seeing a connection happening that I was
> unaware
> > of.
> >
> > The log shows:
> >
> > Mon May 15 21:09:32 PDT 2017 == xxxxx Connected Callsign yyyyy ==> Web
> > Transceiver, Phone Portal, or iaxRpt
> > Mon May 15 21:11:55 PDT 2017 == xxxxx Disconnected Callsign yyyyy ==>
> > Web Transceiver, Phone Portal, or iaxRpt
> >
> >
> > I assume the Web Transceiver can only be done with my login creds for the
> > node on allstar website.  That correct?
> >
> > I don't know what/how a Phone Portal would happen.
> >
> > For iaxRpt, I have just one user (changed username) and password set, so
> it
> > shouldn't be iax.
> >
> > Any way I can dig more into this to see how/why its happening?  Or should
> > this not be of any concern to me?
> >
> > --
> > Bryan
> > K6CBR
> > Allstar Base: 43918
> > Allstar Mobile: 43913
> > www.k6cbr.us
> > QRZ <http://www.qrz.com/db/K6CBR>
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>



-- 
Bryan
K6CBR
Allstar Base: 43918
Allstar Mobile: 43913
www.k6cbr.us
QRZ <http://www.qrz.com/db/K6CBR>