[arm-allstar] help

[Doug Crompton]

Steve,

 It sounds like you have a number of issues that don't seem related but may
be. First a couple of questions...

Did you mod the 888?

What FOB are you using? DMK-URI or one you modified?

Are you are using the V1.5 image from hamvoip and simpleusb?

Answer those questions first but I have found the best and easiest way to
solve issues is one on one on the phone or teamviewer, etc.  Going back and
forth on email can be very time consuming and often not solve a problem
like this. So let me know your contact info and a good time for you if you
want to do that.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, May 14, 2017 at 1:40 PM, "Steven Grandey via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi guys
> I've been in the process of building my node for a while now as time
> permits.
> I have to up and running finally, but I seen to be having a few issues that
> i'm not sure how to solve so I hoping for some guidance.
>
> setup pi3 usb dongle, 888s radio
>
> 1 recieved audio is garbled od overdriven for every one, i've backed off
> the settings in usb-conf to 50 but it's still garbled.
>
> 2. when i boot up the node as i'm building this as a portable node for my
> truck, the usb dongle locks in to a contunious transmit tone and the only
> way i found to break out of it was by running the flash from the simple usb
> tune option D . this seems to do the trick. untill the next reboot or
> restart of asterisk.
>
> 3. some times asterisk fails  or becomes unresponsive and i have to reboot
> the whole system to get it back on line.
>
> any and all ideas?
>
> thanks
>
> --
> Steven Grandey
> KI7FAW node 45811
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>