[arm-allstar] Where to get Suitable USB FOBS

[Michael Durkin]

Looking great.....

Still wish there was a hamlib3 driver that is assembled from the allstar
image for those that dont have a RaspberryPi3...

On Mar 30, 2017 4:46 AM, Peter via arm-allstar <arm-allstar at hamvoip.org>
wrote:

> If anyone fancies modding the low cost boards from eBay that Doug
> recommends below, I made a video that shows a nice method. If you're not
> comfortable with the SMT parts I'm happy to supply them 2 pieces for £20
> plus shipping.
>
>
> https://www.youtube.com/watch?v=qgTyK5drzLo
>
> 73
>
> Peter
> G7RPG
>
>
> On 29/03/2017 22:56, "Doug Crompton via arm-allstar" wrote:
> > This is the current FOB that I would recommend for those modifying them
> on
> > their own.
> >
> > http://www.ebay.com/itm/272374780193
> >
> > This link is also on the FOB mod howto pages at hamvoip.org
> >
> > I also have a friend who is modifying them and putting them in a nice
> > package with a 25 PIN D connector wired the same as a DMK URI. He is also
> > selling modified 888's. He does a very nice job. Contact him direct for
> > more info -  ggianios at verizon.net
> >
> > Also take note that most of the boards now availble use the CM108B or the
> > CM189B chips. Although the specs are basically the same between these and
> > the former non B chips the audio levels are lower on the B versions. So
> you
> > will probably have to make level adjustments when using them.
> >
> > As for mounting the board close to the Pi - I do not recommend it. Test
> we
> > have done show problems with stray digital noise with cards mounted over
> or
> > under the Pi. Also there is no USB on the Pi GPIO pins so you would have
> to
> > loop back to the USB connector in any event.
> >
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> > On Wed, Mar 29, 2017 at 1:31 PM, "Neikolas Czernuszka via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> Hi Gents,
> >>
> >> If your sources for fibs dries up, my friend Alan M0AQC makes them,
> think
> >> they are around $40 dollars delivered.
> >> _______________________________________________
> >>
> >> arm-allstar mailing list
> >> arm-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> >>
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>