[arm-allstar] USB FOB Not recognized

[Doug Crompton]

Maurice,

 You have to tell me more. I am not sure what you are plugging in? If it is
the signalink it will not work. The system - lsusb - may recognize it but
our software will not. You need to use a USB FOB that we recognize and that
has been modified or manufactured to work with Allstar. See the howto's at
hamvoip.org.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sun, Mar 26, 2017 at 6:57 PM, "Maurice Dake via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> When I plug in or disconnect a USB FOB and monitor using SSH set up menu,
> I can see it being recognized when I plug it in and disconnected when I
> pull it out but then it doesn’t show up when I try to do any set up.  Is
> there some place else that I need to select it?  Hope this description make
> sense.
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org