[arm-allstar] SignaLink with Raspberry Pi 3 for Allstar

Doug Crompton wa3dsp at gmail.com
Sun Mar 26 17:11:42 EST 2017


   I have no idea what sound FOB they use in the signalink. I do not own
one. Also VOX is NOT a good idea for Allstar. There are several commercial
products out there from around $50-$70 that would work right out of the
box. If you are on a budget I would suggest using a USB sound FOB (about
$2+mod parts) with modifications. This is described in our howto's. If you
are not able to modify it yourself there is someone that is currently
building and selling modified FOBS and doing a very nice job. I can send
you a personal email with that info if you wish. What radio do you want to
interface Allstar to?

*73 Doug*


*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sun, Mar 26, 2017 at 2:32 PM, "Maurice Dake via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Sorry that I didn’t make myself very clear in my previous post and last
> post used the wrong email address.  I have a running Echolink node using a
> Raspberry Pi 3 and the USB SignaLink.  I was wondering why I couldn’t use
> the same set up with Allstar.  I looked the schematics of the other USB
> interfaces listed on your home page and see that they are just USB sound
> cards with VOX circuitry for PTT.  I’m assuming they are using VOX set up
> in the software for COS?
> A USB Signalink is essentially the same circuitry, why doesn’t it work for
> audio?
> _______________________________________________
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

More information about the arm-allstar mailing list