[arm-allstar] Control GPIO from Allmon

[Doug Crompton]

Justin,

 BTW in case you didn't realize this you can label the controls whatever
you want, like in place of "GPIO1 ON"  -  "Fan ON"  etc.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Thu, Mar 23, 2017 at 10:29 PM, "Justin Reed via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug,
> Actually I remembered that I had wired GPIO 1 to a logic input on the 7330
> at the site, so I toggled it via the webpage and it works.
> Thanks again,
> Justin
>
>
> On 3/23/2017 8:27 PM, Justin Reed wrote:
>
>> On 3/23/2017 4:16 PM, "Doug Crompton via arm-allstar" wrote:
>>
>>> labels[] = "GPIO 1 on"cmds[] = "rpt cmd %node% cop 62 GPIO1=1"labels[] =
>>> "GPIO 1 off"cmds[] = "rpt cmd %node% cop 62 GPIO1=0"
>>>
>>
>> Doug,
>>
>> Thank you!
>>
>> I have entered that and when I get to the site next time I'll confirm
>> whether or not I'm getting the output.
>>
>> 73,
>> Justin
>>
>> NV8Q
>>
>>
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>