[arm-allstar] Soundcard FOB
Leighton Judd
leighton.judd at gmail.com
Mon Mar 20 01:25:42 EST 2017
Thanks Doug,
Are you able to point me in the right direction to convert the image for an
Orange Pi?
Regards,
Leighton
On 20 March 2017 at 17:13, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> Leighton,
>
> For your information we do have that product/vendor code included in our
> V1.5 RPi2/3 software.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Sun, Mar 19, 2017 at 11:00 PM, "Leighton Judd via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Thanks Doug,
> >
> > Yes. I don't think that I could use your image because I was using an
> > Orange Pi, so I had to go about my ARM based node a slightly different
> way.
> >
> > The CM108B's that I have are Device ID'ed as 0x0012. (0d8c:0012).
> >
> > I was able to add some lines into the chan_usbradio.c and
> chan_simpleusb.c
> > files to get myself up and running. Happy to share this if that is more
> > useful.
> >
> > Regards,
> > Leighton
> >
> >
> > On Mon, 20 Mar 2017 at 13:48, "Doug Crompton via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Leighton,
> > >
> > > Thanks for the input. Usually when a card does not work and it is in
> > the
> > > CM108x/CM119x family it is because we have not yet registered the
> > > product/vendor code in our software. If you or anyone is using a board
> > that
> > > uses either of these chips and it is not working please forward the
> > product
> > > and vendor codes so we can include them in the 1.5 code. Then a quick
> > > update at your end for version 1.5+ should make it work.
> > >
> > > To find the product/Vendor ID plug it into the pi and do 'lsusb' at
> the
> > > Linux prompt. You will see something like this -
> > >
> > > [root at Pi3-test asterisk]# lsusb
> > > Bus 001 Device 005: ID 0403:6001 Future Technology Devices
> International,
> > > Ltd FT232 Serial (UART) IC
> > > *Bus 001 Device 006: ID 0d8c:013a C-Media Electronics, Inc. *
> > > Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub
> > > Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
> > SMSC9512/9514
> > > Fast Ethernet Adapter
> > > Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514
> Hub
> > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > >
> > > In this case it is the C-Media entry and the product code is - 0d8c,
> > Vendor
> > > code - 013a
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > > On Sun, Mar 19, 2017 at 10:12 PM, "Leighton Judd via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > G'day all,
> > > >
> > > > I am new to Allstar, but I thought I would share some thoughts on
> this
> > > > matter.
> > > >
> > > > I have been playing around with similar CM108 based USB sound card
> > > devices
> > > > also.
> > > >
> > > > The ones that I have are actually CM108B and required a little bit of
> > > > modification to the code to have them detected.
> > > >
> > > > I have also noticed that on one radio, I have had to increase the mic
> > > gain
> > > > to 999 also. I think that this is just a function of the output level
> > > from
> > > > the radio. It doesn't seem to be a problem, however I am still
> testing
> > my
> > > > setup.
> > > >
> > > > I am happy to share more info regarding my USB sound card and node if
> > > that
> > > > is helpful.
> > > >
> > > >
> > > > Regards,
> > > > Leighton
> > > >
> > > > On Mon, 20 Mar 2017 at 13:03, "Doug Crompton via arm-allstar" <
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > Chris,
> > > > >
> > > > > We use those cards quite a bit and have had no problems. At least
> > > they
> > > > > look like that card. What is the chip number if you can read it.
> > Maybe
> > > > you
> > > > > got a bad card? Do you have another one to try?
> > > > >
> > > > >
> > > > > *73 Doug*
> > > > >
> > > > > *WA3DSP*
> > > > >
> > > > > *http://www.crompton.com/hamradio <http://www.crompton.com/
> hamradio
> > >*
> > > > >
> > > > > On Sun, Mar 19, 2017 at 7:00 PM, "Chris Viningre via arm-allstar" <
> > > > > arm-allstar at hamvoip.org> wrote:
> > > > >
> > > > > > I modafied this
> > > > > > http://www.ebay.com/itm/272374780193?_trksid=p2057872.
> > > > > > m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
> > > > > > soundcard and it works great other than low TX and Rec audio.
> It's
> > ok
> > > > if
> > > > > I
> > > > > > use 999 settings on both but I would like to get it closer to the
> > > > middle.
> > > > > > Everything works good with the URI interface. On the Mic line I
> > have
> > > a
> > > > > 10uf
> > > > > > capacitor and no resistor. RXBOOST is on. Any ideals?
> > > > > >
> > > > > > Chris Viningre
> > > > > > 70 W. Roadrunner
> > > > > > Salt Flat, Texas 79847
> > > > > > C:(915) 504-1510
> > > > > > chrisviningre at gmail.com
> > > > > > Amateur Radio Operator: WS5B
> > > > > > https://www.qrz.com/db/ws5b
> > > > > > http://www.reverbnation.com/chrisviningre
> > > > > > _______________________________________________
> > > > > >
> > > > > > arm-allstar mailing list
> > > > > > arm-allstar at hamvoip.org
> > > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > > >
> > > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > > >
> > > > > >
> > > > > _______________________________________________
> > > > >
> > > > > arm-allstar mailing list
> > > > > arm-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > >
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
More information about the arm-allstar
mailing list