[arm-allstar] COS De-bounce

[Doug Crompton]

In version 1.5  simpleusb-tune-menu  -   rxondelay - it is set to 0 by
default. Values are 20ms, so 5 would yield 100ms.

Use the V option and watch the cos input vs. cos composite display when you
RF TX into your node. You will see the delay in input vs. composite if you
set it high enough. This delays COS by rxondelay value * 20ms.




*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Thu, Mar 16, 2017 at 11:32 PM, "Justin Reed via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Group,
>
> I'm wondering if there is a place within Allstar to define a COS de-bounce
> period.
>
> The specific situation is that the repeater is a DR-1X with a TS-64 PL
> en/dec. The node radio looking toward that repeater, upon unkeying the
> transmitter and switching back to RX, is seeing the wee little piece of
> reverse burst from the repeater and is thumping the COS on the node. I'm
> hoping there is a parameter to ignore COS for a moment after PTT drops,
> much like IRLP's pulseback timer.
>
> Thanks,
> Justin
> NV8Q
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>