[arm-allstar] Permanent link failing

[C B]

normal connection on the links has not been tried.
Why would allmon show it connected when it is not?
Is there a DTMF command that reboots the node?
or cron used to reboot at night for good measure
Chris


      From: Doug Crompton <wa3dsp at gmail.com>
 To: C B <harvard5362 at yahoo.com> 
Cc: ARM Allstar <arm-allstar at hamvoip.org>
 Sent: Wednesday, June 21, 2017 10:03 AM
 Subject: Re: [arm-allstar] Permanent link failing
   
Chris,

 Unfortunately I don't really have an answer for your problem. Sometimes what you think is a reliable connection is really not. It it was a private 100% up link then a non permanent connection should stay up. Did you try that and determine if it stays up any length of time.

Also monitor the logs in the client or at /var/log/asterisk/messages.

73 Doug
WA3DSP
http://www.crompton.com/ hamradio


On Wed, Jun 21, 2017 at 12:29 PM, C B <harvard5362 at yahoo.com> wrote:

Thanks for the quick response.
All nodes involved here are my nodes.
All are your code on PI-3's with the latest updates.
Very stable on my microwave.
Not relying on the /tmp/rpt_extnodes file  as all are hard coded in the rpt.conf file with the ip address and port number as my nodes are all on the same private sub-net. Below is a example of what is in the rpt.conf file i only pasted the first 3 lines. i commented out 1999 as it is not used. Information for all of my nodes are in the rpt.conf as they all have a differnt port and are behing the same firewall.
43816 = radio at 127.0.0.1/43816,NONE;1999 = radio at 127.0.0.1/1999,NONE27008 = radio at 10.0.1.22:4568/27008, NONE
The nodes think they are connected as allmon2 reports them as connected and if i am not mistaken allmon2 gets its connection information from each node.
this issue is very intermittent and not easily repeated. It occurs anywhere from a few days to a few months, and as it does not show up as an issue on allmon2 it is hard to know when it has occurred.
Thank you again for your help.



      From: Doug Crompton via arm-allstar <arm-allstar at hamvoip.org>
 To: ARM Allstar <arm-allstar at hamvoip.org> 
Cc: Doug Crompton <wa3dsp at gmail.com>
 Sent: Wednesday, June 21, 2017 9:05 AM
 Subject: Re: [arm-allstar] Permanent link failing
  
Chris,

  I have not seen this problem here and I run several permanent
connections. Keep in mind that whoever you are connecting to can manually
disconnect a permanent link to them. So if the node you are connecting to
is not yours or it is yours and you are not sure if someone could be
disconnecting from the other end check to see if that might be the case.

To better understand why this might be happening we would need more info.
Are the links generally reliable or are they constantly
disconnecting/reconnecting? What code version is a BOTH end? Is there any
situation that you can identify when this happens? You can go into the
Asterisk client (ADMIN menu item 11) and view the log to see if reconnects
are taking place.

Asterisk requires that both ends have knowledge of the other ends IP
address. This is done through the /tmp/rpt_extnodes file. If one end (your
end) had the connection list and the other end did not the connection would
fail and your end would continue to try and reconnect forever until either
you restarted/rebooted or you execute a permanent disconnect. During this
period if you had previously been connected the connection list would
probably still show connected.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/ hamradio <http://www.crompton.com/ hamradio>*





On Wed, Jun 21, 2017 at 11:23 AM, "C B via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
>
>
> Randomly my Permanent links are acting as if they are notconnected. Almon2
> still shows them as connected however the signals to not passthru.
>
>
> Background on my configuration.
>
>
> There are more than 30 nodes in the system that is connectedon the same
> private sub net, on a vlan on the wide area intranet; this intranetconsists
> mostly of IP microwave.  All nodessit behind a router. There are also nodes
> connected via the public internet.
>
>
> Each node has a unique port number, there is a line in eachnode in the
> prt.conf so that the private ip address and port are known for eachof the
> nosed on the same subnet of the wide area intranet. Thus this is notrelying
> on a hairpin thru the router for connectivity.
>
>
> The nodes Permanent link is set up by having a startup_macro=*73xxxxxxxxin
> the rpt.conf
>
>
> Every so often a node no longer is linked but it still showslinked in
> allmon2.
>
>
> Restarting asterisk resolved this issue.
>
>
> Any idea on what can be done here to make this more reliable?
>
>
> Thank you in advance for any help.
>
>
> Chris
>
> ______________________________ _________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi- bin/mailman/listinfo/arm- allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
______________________________ _________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi- bin/mailman/listinfo/arm- allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org