[arm-allstar] HobbyPCB RS-UV3

[Marty]

A question was asked off the list the COR signal is on Pin 5 of the DB9 is
used unlike the documentation reads as from the guys at HobbyPCB.

73,
Marty KD4HLV
28523

Date: Tue, 13 Jun 2017 18:55:00 -0400
From: Marty <kd4hlv at gmail.com>
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] HobbyPCB RS-UV3
Message-ID:
        <CAO=2xhrvCMhg5cKnjhQce9mB0sw=PTS=MXt=nzBxNaP7=7P04A at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Opps did that wrong, Sorry,

I've been using there HobbyPCB RS-UV3 for over a year now and had very good
luck with the radio and have a couple of them. I've been using RX PL never
tied the TX PL. But there is one thing you have to use the latest firmware
and use the Windows Program not the command line and that was from the guys
at HobbyPCB.

73,
Marty KD4HLV