[arm-allstar] How to generate PL

[Doug Crompton]

Tom,

 I discussed this with Dave and there is currently no way to do this with
Allstar with any channel driver. The capability does not exist. We are
going to look into the possibility to add this but no promises.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, Jun 13, 2017 at 12:01 AM, "Tom Hayward via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> On Mon, Jun 12, 2017 at 8:54 PM, "Doug Crompton via arm-allstar"
> <arm-allstar at hamvoip.org> wrote:
> > Tom,
> >
> >   I need to understand why you want to do what you say you want to do! Is
> > this a remote simplex Allstar node linked to a repeater and you don't
> want
> > ID, hangtime, etc. to go out over the Allstar network?
>
> This is for a full duplex repeater.
>
> It's standard best practice, at least in this region, to only encode
> PL when the audio path is active. This is convenient if you need to
> hang an analog link off the repeater, a user decides to cross-band
> with their mobile, or if you just don't want to hear all the extra
> stuff. (When monitoring a repeater 24/7, the IDer gets annoying.)
>
> Tom
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>