[arm-allstar] How to generate PL

[Doug Crompton]

Tom,

  I need to understand why you want to do what you say you want to do! Is
this a remote simplex Allstar node linked to a repeater and you don't want
ID, hangtime, etc. to go out over the Allstar network?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Mon, Jun 12, 2017 at 6:39 PM, "Tom Hayward via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> On Mon, Jun 12, 2017 at 3:33 PM, "Doug Crompton via arm-allstar"
> <arm-allstar at hamvoip.org> wrote:
> > Personally if I had a radio that required PL I would get a com-spec
> TS64. I
> > use one in a commercial repeater that had no PL. It is an encoder/decoder
> > with a lot of features. It will interface nicely to Allstar nd simpleusb.
>
> Adding a PL encoder is not a problem. How would I configure app_rpt to
> enable/disable the PL encoder via a GPIO when the audio path is
> active? (No PL on IDer, courtesy tone, or hang time)
>
> Tom KD7LXL
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>