[arm-allstar] How to generate PL

[Stephen - K1LNX]

That's what I was afraid of :(

I think I can use it in my application, but as you pointed out the pin
needs to be active before the transmitter for it to work. I use DPL, but I
assume this would work the same.

Good luck!

Stephen
K1LNX

On Mon, Jun 12, 2017 at 2:40 PM, Tom Hayward <tom at tomh.us> wrote:

> On Mon, Jun 12, 2017 at 10:29 AM, Stephen - K1LNX <k1lnx at k1lnx.net> wrote:
> >> - I could generate PL with the transmitter, but this would add PL to
> >> the hang time, courtesy tone, and IDer. Not what I want. (Are the any
> >> programming tricks I can do in the CDM to toggle PL generation?)
> >
> >
> > Pin 6, 8, 12, or 14 looks like it can be enabled for "TX PL Inhibit",
>
> Thanks for the hint! I just ran this by the friend I am working with
> on this repeater. He says he has tried using this setting with the
> CDMs, but it is not effective during a transmission, only before. This
> might work for your IDer, but won't allow me to remove PL from the
> courtesy tone and hang time because this needs a mid-transmission
> change.
>
> Tom KD7LXL
>