[arm-allstar] RPi3 WiFi

[Doug Crompton]

iaxrpt connects TO Allstar not the other way around. I doubt it has
anything to do with wireless but rather something is not setup correctly.
One gotcha is if your Allstar IAX port is on other than 4569 you must
specify the port in the iaxrpt setup. It does not sound like that is the
problem in your case though. Remember that wireless will be a different IP
address than wired when using DHCP as it is a different MAC address. Make
sure you are trying to connect to the right IP address. You can make the IP
address reserved in the router based on the MAC address of the Pi BUT you
can't reserve the same IP for both wire and wireless as they are different
MAC addresses.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Mon, Jun 12, 2017 at 10:34 AM, "John Isabella via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Fresh install 1.5 from hamvoip The config creates the WPA_suppliment and
> connects to all star servers and can do updates. However, I can not connect
> to iaxrpt on my windows machine.
> I took a RPi 2 and a usb WiFi adapter and put the sd card in it and it can
> connect to the iax windows client. So all the settings in .conf files  are
> correct as well as iax windows client.
> If I use a hardwire to RPi3 it works. So I know the port forwarding and
> internal IP address are correct.
> I even took back the RPi3 and exchanged it for a different to eliminate
> the Pi3 WiFI as being defective.
> Anyone else have this problem or know of solution?
> Thanks K1IF
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org