[arm-allstar] SSH Enable

[Jeremy Utley]

Once booted up and logged in using a keyboard, use the "9" menu option to get to a shell, and you should be able to do:

systemctl enable sshd && systemctl start sshd

That should set the ssh daemon to start on boot, and start it up.

Jeremy, NQ0M

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of "David via arm-allstar"
Sent: Monday, June 5, 2017 8:14 PM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: David <david at kg5rdf.com>
Subject: Re: [arm-allstar] SSH Enable


Thanks for the reply. I have not changed anything and can see SSH is not enable on boot up. I am aware of port 222. I did not see anyway to enable SSH from the scripts only change port number. Is there a specific file I can edit?
-------- Original message --------From: David McGough <kb4fxc at inttek.net> Date: 6/5/17  1:54 PM  (GMT-06:00) To: David via arm-allstar <arm-allstar at hamvoip.org> Cc: David <david at kg5rdf.com> Subject: Re: [arm-allstar] SSH Enable 

Hi David,

ssh comes pre-enabled in all V1.5 firmware images. However, the port is non-standard---try connecting to port 222.

Note that you can change this port, etc., from the setup scripts and/or the admin menu.

73, David KB4FXC


On Mon, 5 Jun 2017, "David via arm-allstar" wrote:

> Trying to enable SSH with RPi2-3 Image Version 1.5rc2 on a Raspberry pi 3. Is there a specific file I can edit or where is the proper placenent of the blank file name: ssh to invoke It?
> Thanks David
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> 


null
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org