[arm-allstar] adding a IP phone to system

[Lee]

Dear all

Thank you Doug and Larry's help, it works now.

Br
Lee
VR2XKP

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Larry via arm-allstar"
Sent: Friday, June 02, 2017 1:52 AM
To: arm-allstar at hamvoip.org
Cc: Larry <larry at thunderbolt.net>
Subject: Re: [arm-allstar] adding a IP phone to system

Apologies to the group...
I had sent Lee and the group a reply with some screen shots include in the
email forgetting that they would cause the message to fail due to the
embedded images.
That was the reason my other messages made no sense.

Larry - N7FM


On 06/01/2017 10:39 AM, "Larry via arm-allstar" wrote:
> Lee .... sorry I had a typo in the command to show the peer registration
> should be ...........         sip show peers
>
> Glad Doug told you about the Sip module loading as I had forgot about 
> that.
>
> Larry - N7FM
>
> On 06/01/2017 10:01 AM, "Doug Crompton via arm-allstar" wrote:
>> Lee,
>>
>>   I am assuming you are using hamvoip.org version 1.5 Allstar.
>>
>> sip is not loaded by default. You must go into 
>> /etc/asterisk/modules.conf and comment (add a semicolon) at the 
>> beginning of the line  - noload=chan_sip.so  - so that it loads. You 
>> will need to restart Asterisk or reboot for this to take effect.
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>>
>>
>>
>>
>>
>> On Thu, Jun 1, 2017 at 12:01 PM, "Lee via arm-allstar" < 
>> arm-allstar at hamvoip.org> wrote:
>>
>>> Hello
>>>
>>>
>>>
>>> I am writing to asking help to add a IP phone (Linksys SPA-921) to 
>>> Asterisk Allstar system.
>>>
>>>
>>>
>>> I add the following to the bottom of the file /etc/asterisk/sip.conf
>>>
>>>
>>>
>>> [mytest]
>>>
>>> username=mytest
>>>
>>> secret=mytest
>>>
>>> type=friend
>>>
>>> host=dynamic
>>>
>>> context=internal
>>>
>>>
>>>
>>> Then Save & Exit.
>>>
>>>
>>>
>>> Then I add the following under the [default] section of the file
>>> /etc/asterisk/extensions.conf
>>>
>>>
>>>
>>> [internal]
>>>
>>> exten => 1001,1,Dial(SIP/mytest)
>>>
>>> exten => 1001,n,HangUp()
>>>
>>>
>>>
>>> Then Save & Exit.
>>>
>>>
>>>
>>> The config of the phone please refer to the attachment.
>>>
>>>
>>>
>>> I boot the Asterisk Allstar (Rpi 2) as well as the IP phone, but the IP
>>> phone cannot register to Asterisk Allstar. Tried for many time but 
>>> no help.
>>>
>>>
>>>
>>> Those configuration are refer Internet information, anyone can help ?
>>>
>>>
>>>
>>> Thank in advance.
>>>
>>>
>>>
>>> Br
>>>
>>> Lee
>>>
>>> _______________________________________________
>>>
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>
>>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org