[arm-allstar] adding a IP phone to system

[Doug Crompton]

Lee,

 I am assuming you are using hamvoip.org version 1.5 Allstar.

sip is not loaded by default. You must go into /etc/asterisk/modules.conf
and comment (add a semicolon) at the beginning of the line  -
noload=chan_sip.so  - so that it loads. You will need to restart Asterisk
or reboot for this to take effect.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*






On Thu, Jun 1, 2017 at 12:01 PM, "Lee via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello
>
>
>
> I am writing to asking help to add a IP phone (Linksys SPA-921) to Asterisk
> Allstar system.
>
>
>
> I add the following to the bottom of the file /etc/asterisk/sip.conf
>
>
>
> [mytest]
>
> username=mytest
>
> secret=mytest
>
> type=friend
>
> host=dynamic
>
> context=internal
>
>
>
> Then Save & Exit.
>
>
>
> Then I add the following under the [default] section of the file
> /etc/asterisk/extensions.conf
>
>
>
> [internal]
>
> exten => 1001,1,Dial(SIP/mytest)
>
> exten => 1001,n,HangUp()
>
>
>
> Then Save & Exit.
>
>
>
> The config of the phone please refer to the attachment.
>
>
>
> I boot the Asterisk Allstar (Rpi 2) as well as the IP phone, but the IP
> phone cannot register to Asterisk Allstar. Tried for many time but no help.
>
>
>
> Those configuration are refer Internet information, anyone can help ?
>
>
>
> Thank in advance.
>
>
>
> Br
>
> Lee
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>