[arm-allstar] FOB Photos

[Lee]

Hello all

Yes, I tried to upload to my google drive and sharing to public. Here is the
link:

https://drive.google.com/file/d/0Bzq5pmUwn9rZX1BfZVlCRlJmcms/view?usp=sharin
g

https://drive.google.com/file/d/0Bzq5pmUwn9rZV0ZJRUhlVXlQWVk/view?usp=sharin
g


Br
Lee
VR2XKP

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Michael Durkin via arm-allstar"
Sent: Monday, July 17, 2017 1:06 AM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Michael Durkin <kc7noa at gmail.com>
Subject: Re: [arm-allstar] FOB Photos

Upload them to your folder in the groups photo or files section ... then
post the link in your email should always work --- except for those whom are
not logged into yahoo .... or perhaps its a file extension issue ...

Love to see the ptt/cos added to hamlib so everyone can use these style
fob's and not JUST allstar/arm ....

On Jul 16, 2017 6:19 AM, Lee via arm-allstar <arm-allstar at hamvoip.org>
wrote:

> Dear Doug
>
>
>
> I cannot attached photos in the mailing list, here attached the 2 
> photos for reference.
>
>
>
> I will appreciate if you can forward the photos to the mailing list.
>
>
>
> Br
>
> Lee,  VR2XKP
>
>
>
> From: Doug Crompton [mailto:wa3dsp at gmail.com]
> Sent: Sunday, July 16, 2017 8:42 AM
> To: Lee <lee23942003 at yahoo.com.hk>
> Cc: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] FOB Photos
>
>
>
> Lee,
>
>  I was researching back through mail because a friend asked to see 
> your FOB design. I forgot if I responded to your original email but if 
> not I really like what you did. It may not be practical on a large 
> scale build but it certainly is nice packaging.
>
>
>
>
> 73 Doug
>
> WA3DSP
>
> http://www.crompton.com/hamradio
>
>
>
>
>
> On Fri, Jul 7, 2017 at 1:56 PM, Lee <lee23942003 at yahoo.com.hk <mailto:
> lee23942003 at yahoo.com.hk> > wrote:
>
> Hello all
>
>
>
> Let's share the idea to package the circuit. Attached is my one.
>
>
>
> Br
>
> VR2XKP
>
>
>
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org <mailto:
> arm-allstar-bounces at hamvoip.org> ] On Behalf Of "Doug Crompton via 
> arm-allstar"
> Sent: Friday, July 07, 2017 11:25 PM
> To: ARM Allstar <arm-allstar at hamvoip.org 
> <mailto:arm-allstar at hamvoip.org>
> >
> Cc: Doug Crompton <wa3dsp at gmail.com <mailto:wa3dsp at gmail.com> >
> Subject: [arm-allstar] FOB Photos
>
>
>
> Attached are examples of how to package the open board FOB. This shows 
> using a DB25 wired to emulate a DMK/URI. The USB connections are wired 
> directly to the board from a cut USB cable. The board is mounted on a 
> sub board where all of the connections are made. The two wires to the 
> CM108 in the second photo are fed under the row of pins from the right 
> and tacked at the last pin on the left.
>
> I encourage you to make this a DIY project but the FOB shown here is 
> being made and is available for purchase. I hesitated to make this 
> public as it is more a service than a business and I don't want the 
> producer to become inundated!
>
>
>
>
> 73 Doug
>
> WA3DSP
>
> http://www.crompton.com/hamradio
>
>
>
>
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org