[arm-allstar] usb2 not active on Rpi3 server

[Doug Crompton]

Yes, I was going to mention the same thing. In rpt.conf the rxchannel needs
to match the name in the second stanza of simpleusb.conf. Typically it has
been usb and usb2 in simpleusb.conf. That name and the name you call it in
rpt.conf have to match.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Fri, Jul 14, 2017 at 2:18 PM, "LaRoy McCann via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Not sure if this is it but make sure you changed the rxchannel setting for
> the second node stanza in rpt.conf.
>
> Should be "rxchannel = SimpleUSB/usb2"
>
> LaRoy K5Tw
>
> On 7/14/2017 12:59 PM, "Ray Congdon via arm-allstar" wrote:
>
>> I'm attempting to setup a second node on my server. Everything seems to
>> be happy now except of course it doesn't work. simple-usb-tune allows me to
>> select the second usb (usb2) but says "Device usb2 currently not active"
>> when I do a View. If I do a lsusb I see both dongles... I've been following
>> the "How To" by WA3DSP of 04/19/15Thanks! Ray C. KL7UT
>> _______________________________________________
>> arm-allstar mailing listarm-allstar at hamvoip.orghttp://
>> lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org-- This message
>> has been scanned for viruses anddangerous content by the DTISP MailScanner,
>> and isbelieved to be clean.
>>
>>
>>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>