[arm-allstar] The ID volume too loud.

[Doug Crompton]

Paul,

Telemetry levels are handled by two commands in rpt.conf

; Audio Level settings in dB

telemnomdb=0
                                ; Overall reduction in telemetry level
telemduckdb=-9
                                ; Telemetry level reduction with signal

The first setting above is the base level. The second is the amount of
reduction in level when a signal is present - when someone is speaking.
These levels are in dB and reductions would be in minus numbers. Experiment
with different values of -1 down. You can use  *80 or *81 to test your
changes. Changing these values requires a reload of rpt.conf or a restart
of asterisk for them to take effect.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Fri, Jul 14, 2017 at 4:03 AM, "Paul E Bueltmann Jr via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Where do I go to set the volume of the station ID
>
> Paul B KH6GKK
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>