[arm-allstar] RPi-2 Station ID on the Hour.

[Doug Crompton]

Paul,

 In hamvoip.org code the time (and weather if configured) are from a cron
entry.

Enter  crontab -e   at the linux prompt. You will see the below as one of
the lines.

00 0-23 * * * (source /usr/local/etc/allstar.env ; /usr/bin/nice -19
/usr/bin/perl /usr/local/sbin/saytime.pl $NODE1 > /dev/null)

Put a # at the beginning of the line to comment it out if you do not want
the hourly time. Save the file and you should be good to go.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Mon, Jul 10, 2017 at 10:29 PM, "Paul KH6GKK via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> In the rpt.conf file the settings for the Time/ID are commented out, but
> every hour I get a time followed by a station ID.
>
>
>
> [schedule41891]
>
>
> ;dtmf_function =  m h dom mon dow  ; ala cron, star is implied
>
>
> ;1=00 * * * *   ;run macro 1 on the hour
>
>
>
> [macro41891]
>
> ;Macro number = command string (ea command separated by space) -end with
> HASH
>
> ;1=*81 *80#    ; play time and voice ID
>
>
>
> Where else should I look for the setting of the scheduled time/id?
>
>
>
> Paul B KH6GKK
>
> Ainaloa, HI.
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>