[arm-allstar] Remote Allstar Node

[Doug Crompton]

John,

 The radio does not "talk back" to Allstar with any status so other than
talking to someone at the other end you would have no way of knowing if it
is working. Is there not someone you can contact within range of the radio
to check it out?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, Jul 8, 2017 at 7:23 PM, "John Hoser-Smith via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Remote Radio is a   TYT-9000D  UHF model connected via old traditional
> DB-9 Serial cable to my DB-9 Serial FOB.  FOB then connected to Rpi 3 via
> the USB Interface on the Pi.
>
>
>     On Saturday, July 8, 2017 5:14 PM, David McGough <kb4fxc at inttek.net>
> wrote:
>
>
>
> Hi John,
>
> What type of radio or repeater the RPi3 connected to??
>
>
> 73, David KB4FXC
>
>
>
> On Sat, 8 Jul 2017, "John Hoser-Smith via arm-allstar" wrote:
>
> > Is there a trick?
> I can reach my remote Allstar Node via the Internet using SSH-222 and
> SuperMon and LSNodes.It's easy to control/manage using these great remote
> control tools.Q.)Â  Is there a way to check (remotely) to learn if the
> Radio connected to the Remote Allstar Node is turned on and powered up?
> We suspect a 15 minute power outage at the remote Allstar site...RPi 3
> Allstar Node came back up...however we're not 100% sure if the connected
> Radio came back on, too...is there a way to check that Radio, remotely?
> Thanks!73s    N0ECT
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org