[arm-allstar] FOB full-size Photos

[George Gianios]

Thanks Dave --- They came from me -- 
George
WB3DZZ


-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"David McGough via arm-allstar"
Sent: Friday, July 7, 2017 2:50 PM
To: "Doug Crompton via arm-allstar"
Cc: David McGough; Doug Crompton
Subject: Re: [arm-allstar] FOB full-size Photos


Here are links to the full-size images:

https://hamvoip.org/photos/20170707-FOB_board_only.jpg
https://hamvoip.org/photos/20170707-FOBcomplete.JPG
https://hamvoip.org/photos/20170707-FOB_incase_coveroff.JPG




On Fri, 7 Jul 2017, "Doug Crompton via arm-allstar" wrote:

> Attached are examples of how to package the open board FOB. This shows 
> using a DB25 wired to emulate a DMK/URI. The USB connections are wired 
> directly to the board from a cut USB cable. The board is mounted on a 
> sub board where all of the connections are made. The two wires to the 
> CM108 in the second photo are fed under the row of pins from the right 
> and tacked at the last pin on the left.
> 
> I encourage you to make this a DIY project but the FOB shown here is 
> being made and is available for purchase. I hesitated to make this 
> public as it is more a service than a business and I don't want the 
> producer to become inundated!
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org