[arm-allstar] Port Forwarding

[Doug Crompton]

Ed,

 The answers are in a howto on the web page - hamvoip.org.  I wish more
people would at least look there first otherwise you might get some answers
here that are either not right or are incomplete!  The default iax port is
4569. I typically go down from there (4568, 4567, 4566...) but you can go
up also. The key is to use a different port for each server on the same
public IP. Then if you desire you can port forward to each one. You also
MUST set the proper port for each server at allstarlink.org under the
server network tab. See -

  https://www.hamvoip.org/multi-server%20howto.pdf


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, Jul 1, 2017 at 6:16 PM, "Ed Hardwood via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I hope somebody can help me out. I am running node 43497 and all is good.
> I got another Raspberry PI and I'm trying to set it up as a radio-less node
> to be used as a hub to link other nodes during weather emergencies. I'm
> having trouble setting up port forwarding on my router for the second node.
> Can somebody help me out? Oh the second nod is 46208.
>
> Thank you.
>
> Ed Harwood (W5CVE)
>
> Sent from my iPhone
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>