[arm-allstar] Echolink module fix

[David McGough]

Hi,


The next place to look is your /etc/asterisk/echolink.conf file for some 
type of config issue.

As you can see from the CLI, the echolink module is now loading.

73, David KB4FXC


On Sun, 29 Jan 2017, "Max via arm-allstar" wrote:

> I'm sorry, but this did not fix the problem.  Also, I cannot load Echolink
> from CLI.  when I try to load the chan_echolink.so module from CLI it says
> "module chan_echolink.so already exists".
> 
> On Sat, Jan 28, 2017 at 11:46 PM, "David McGough via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
> >
> > Hi Max and Everyone,
> >
> > Doug and I found and resolved this issue with echolink tonight. This was
> > a long-standing bug that dates back to the ACID days, which would cause
> > the echolink module to fail to load when Asterisk starts.
> >
> > To resolve this bug in version 1.5, please run the system update menu
> > item ("1 - Perform a System UPDATE") from the Admin Menu. Once the update
> > is complete, Asterisk will automatically restart. No reboot should be
> > needed.
> >
> > Please give it a try-
> >
> > 73, David KB4FXC
> >
> >
> >
> > On Sat, 28 Jan 2017, "Max via arm-allstar" wrote:
> >
> > > I just checked modules.conf and the "noload=chan_echolink.so" line has a
> > > semicolon ; in front of it.  However, the echolink.so module isn't
> > > loading.  I can manually load it from CLI, but it is not loading on
> > bootup.
> > >
> > > On Sat, Jan 28, 2017 at 4:58 PM, "Steve Agee via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > enable the Echolink Channel Driver in /etc/asterisk/modules.conf
> > > >
> > > > N5ZUA
> > > >
> > > >
> > > >
> > > > On 1/28/2017 3:54 PM, "Max via arm-allstar" wrote:
> > > >
> > > >> Echolink does not appear to be loading when V1.5 boots.  After
> > booting I
> > > >> can go into CLI client and issue an echolink dbdump and get nothing.
> > > >> However, when I load the Echolink module from CLI using the "module
> > load
> > > >> chan_echolink.so" command then Echolink loads and the echolink dbdump
> > > >> returns the usual long list of Echolink nodes.
> > > >>
> > > >> What loads Echolink?  Where might I look?
> > > >> _______________________________________________
> > > >>
> > > >> arm-allstar mailing list
> > > >> arm-allstar at hamvoip.org
> > > >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >>
> > > >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >>
> > > >>
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>