[arm-allstar] connection request failed

[wd5etd at gmail.com]

Your provider (whois shows EagleNet) may not allow incoming connections.  If you are behind a router you may need to add port forwarding to the internal address of the node.  You may be double NAT'd--meaning the ISP has an external router with fake IP's behind it plus your internal router.  The last being the hardest to get by.  There are ways around it but, not for the faint of heart (e.g., a UPNP agent).

Rick wd5etd

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of "Eric Harrison via arm-allstar"
Sent: Tuesday, January 17, 2017 6:50 AM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Eric Harrison <n7jys at yahoo.com>
Subject: [arm-allstar] connection request failed

Having problems with connection fail on connecting to node 42838 using udp port 4568 in iax.conf  from other Allstar nodes.
My node 42838 resolves as 67.214.200.168:4569/67.214.200.168  in the /tmp/rpt_extnodes files. So if other allstar node user are receiving this info they should be able to connect. Any ideas to the reasoning for failed connections?
  Eric (N7JYS)
Marshall's Communications
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus