[arm-allstar] No SSH

[Doug Crompton]

Also if you have a computer on the inside you can run nmap on you could do
this - obviously change the IP address range to suit.

  nmap -T5 -n --open  192.168.1.0/24


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Tue, Jan 3, 2017 at 5:28 PM, "David McGough via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Hi Robert,
>
> I don't suppose the sshd TCP port got changed to something other than port
> 22 or 222???
>
> I guess you are trying to connect to the proper TCP port from your client?
>
> 73, David KB4FXC
>
> On Tue, 3 Jan 2017, "Robert Newberry via arm-allstar" wrote:
>
> > I tried DMZ, no joy...
> >
> > Also the LAN IP couldn't of changed because I can still use IAXRPT to
> > connect so if the LAN IP changed, I'd be hosed there too!
> >
> > Thanks for the suggestions, it will have to wait until I get on site.
> >
> > N1XBM
> > Apparare Scientor
> > Paratus Communicare
> > Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
> > www.radioguysrepeaternetwork.com
> >
> > On Jan 3, 2017 11:23 AM, Bryan St Clair via arm-allstar <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > A few ideas for remote diag:
> > >
> > > Can you confirm the IP address of the node hasn't changed (internal)
> via
> > > the router?
> > >
> > > Can you set a DMZ to that IP and try the default and custom ports for
> SSH?
> > >
> > > Just a couple ideas, for remote recovery.
> > >
> > > Bryan
> > >
> > >
> > > On Jan 3, 2017 08:10, Robert Newberry via arm-allstar <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > I am going to be heading to one of my sites that is about an hour
> away. I
> > > am using a RPI3 using the hamvoip image. I am hardwired to my router
> and
> > > this configuration has worked just dandy for over a year. I needed to
> ssh
> > > into my node and I get no response like the node isn't answering me.
> > >
> > > I have not changed anything.
> > >
> > > I reset the RPI using a power cycle on my ethernet power switch.
> > >
> > > I reset the router. I also checked my portable forward rules.
> > >
> > > The node works and functions like there is no problem. Except no SSH.
> > >
> > > I am going to head to the site so I can look from a local monitor and
> look
> > > at my ssh configuration.
> > >
> > > Anyone got any suggestions or test I should run while on site?
> > >
> > >
> > > N1XBM
> > > Apparare Scientor
> > > Paratus Communicare
> > > Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
> > > www.radioguysrepeaternetwork.com
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>