[arm-allstar] CW Only

[Doug Crompton]

Greg,

 Time of day is controlled by cron - crontab -e  - comment out the line for
time. CW ID can be set in rpt.conf ID section. Comment out the voice ID and
uncomment the CW ID.

; ID settings
                                ; ID recording files must have extension
gsm,ulaw,pcm,
                                ; or wav. No file extension is used.
                                ; All ID recording files should be sampled
at 8KHZ

;idrecording=/etc/asterisk/local/node-id
                                ; Main ID voice
;idrecording=|iDE WA3DSP/L
                                ; Main ID CW
;idtalkover=|iDE WA3DSP/L
                                ; ID when signal present

idrecording=/etc/asterisk/local/node-id





*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Fri, Feb 24, 2017 at 10:34 AM, "Greg Thornwall via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Hi, I'm trying to setup my node that only tx the CW ID not the time of
> day etc. Ilooked through the documentation but I have not had any luck.
> I thought I had one node setup that way before.
>
> tnx 73 Greg KD3SU
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>