[arm-allstar] parrot node

[Doug Crompton]

Kevin,

 You need to do this -

parrot=0

in your node stanza - the first stanza in your /etc/asterisk/rpt.conf file
If you want to do it in multiple nodes on one server add this to all the
node stanzas you want to use parrot on.

Add in the functions stanza -

A4=cop,55

The A4 assignment is optional. It could be unused codes in the 8xx, or 9xx
ranges also.

This give a one time parrot. You PTT, execute the code, say what you want
to say, release PTT  and hear yourself back.

There is also an echo mode in simpleusb-tune-menu available from the ADMIN
menu but this could not be exercised by using DTMF.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Feb 18, 2017 at 8:06 PM, "Kevin Halton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I am trying to setup a parrot node on a RPI3. I have configured v1.5.3.4 so
> it is running on my network. I have changed to "parrotmode=2", restarted
> Asterisks put nothing happens, what steps did I miss? Is there a
> step-by-step how to on setting this up? My knowledge is limited at best,
> but
> up to the challenge.
>
>
>
> Thanks
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>