[arm-allstar] v1.5 and voice ID

[Chris Viningre]

After it says my call and repeater it stays keyed for 8 seconds. Any ideal why?
Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
chrisviningre at gmail.com
Amateur Radio Operator: WS5B
https://www.qrz.com/db/ws5b
http://www.reverbnation.com/chrisviningre


On Thu, Feb 2, 2017 at 7:16 PM, "Doug Crompton via arm-allstar"
<arm-allstar at hamvoip.org> wrote:
> chris,  you left out the most important part!
>
> #! /bin/bash
> cat   /var/lib/asterisk/sounds/letters/w.gsm
> /var/lib/asterisk/sounds/letters/s.gsm
> /var/lib/asterisk/sounds/digits/5.gsm
> /var/lib/asterisk/sounds/letters/b.gsm
> /var/lib/asterisk/sounds/repeater.gsm
> * >   /etc/asterisk/local/node-id.gsm *
>
> The part in bold at the end. Also note this is ALL one line not multiple
> lines as shown above. It is one command. Without the last line shown above
> like you said all you would get is the binary output of those file send to
> the screen which will do some strange things. The way cat works is like
> this -
>
> *cat some-file*           - write the file to the screen
> *cat some-file some-other-file*    - write both files in order to the screen
> *cat some-file > another-file*   - essentially copy the file
> *cat some-file some-other-file > another-file *  - copy in order all the
> files in the list to another file - this is what combine.sh is doing.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Thu, Feb 2, 2017 at 6:16 PM, "Chris Viningre via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Iḿ sure Iḿ doing something wrong.
>>
>> #! /bin/bash
>>
>> cat   /var/lib/asterisk/sounds/letters/w.gsm
>> /var/lib/asterisk/sounds/letters/s.gsm
>> /var/lib/asterisk/sounds/digits/5.gsm
>> /var/lib/asterisk/sounds/letters/b.gsm
>> /var/lib/asterisk/sounds/repeater.gsm
>>
>> # Combines Allison voice fragments to create a combined voice file.
>> # Look in the /var/lib/asterisk/sounds directory for filenames
>> # All mixed voice files must be of the same type - .ulaw, .gsm etc.
>> # and the output file must be of the same type. If you need
>> # to change file type use sox -
>> # Ex -  sox -t ul -r 8000 <input file>.ulaw <output file>.gsm
>> #
>> # Change the combined text above to your choice
>> # Change the output directory and filename to suit your needs.
>> #
>> # Make this script executable and run it to create combined audio file
>> #
>> # WA3DSP 11/2013
>> Chris Viningre
>> 70 W. Roadrunner
>> Salt Flat, Texas 79847
>> C:(915) 504-1510
>> chrisviningre at gmail.com
>> Amateur Radio Operator: WS5B
>> https://www.qrz.com/db/ws5b
>> http://www.reverbnation.com/chrisviningre
>>
>>
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org