[arm-allstar] Asterisk - Hum

[Terry Bethlehem]

Also ferrite chokes, short as possible wiring, and a common ground between
the node, interface, and radio might help.

On Dec 13, 2017 5:15 PM, Eric Smyder via arm-allstar <
arm-allstar at hamvoip.org> wrote:

> Hello all:
>
> I've been experimenting with HAMVOIP, on a Pi3 at the home QTH with a
> BF-888s as my radio.  It is a remarkably good system and easy to
> configure.  However, I'm having an issue.  It is actually the same issue I
> noticed on the W3HZU 6 meter repeater.
>
> The video links below exemplifies the issue.  When transmitting directly
> from the repeater with the hand-mic the repeater sounds great.  When I
> trigger the AllStarLink from Asterisk, or when the node makes an
> announcement or identifies, there is a distinct tone or hum.  I get the
> same thing on my Pi 3 at the house if I key the transmitter and speak into
> the BF-888s.  It seems to be coming through the computer or being picked up
> somewhere in the connections to the URI.  I have taken measures to shield
> the wiring between the radio and the URI, but the hum is still there.
>
> At W3HZU 6m AllStarLink
> https://photos.app.goo.gl/OtJn3aK2ZRCd6cPs2
>
> At the home QTH using the Pi3, where the hum is more noticeable.
> https://photos.app.goo.gl/XsUC4on5t04LH6CS2
>
> Has anyone else noticed this and is there something I can do about it?
>
> Thanks,
>
> Eric
> N3FIX
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>