[arm-allstar] Repeater Tail

[David]

Doug,

Thanks for the reply. I have an Allstar node linked via RF to a 20 site 
repeater system (Allstar node - URI -V71-repeater). I find that the 
repeater tails go over Allstar/Internet. We will be moving he Allstar 
node it to the main repeater hub in October. When individuals connect 
via the allstar node, the repeater tail does go back over the internet, 
but when someone connects a node with repeaters connected, the repeater 
tails can loop and keep the complete system in TX.

Yes, I have turned all telemetry, and and have duplex=0. That's a vary 
good idea to have the output PL to follow input PL.

Thanks, David

--------------------------------------

Message: 5
Date: Tue, 8 Aug 2017 16:47:22 -0400
From: Doug Crompton<wa3dsp at gmail.com>
To: ARM Allstar<arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Repeater Tail
Message-ID:
	<CAMp6vssNu-aijq+skpAN3aK06c=eGcjo1pK+0PdtQVf_-nJH-g at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Dave,

I am not sure what your setup is there but if you have your simplex node
connected to a repeater you need to turn off at least the courtesy tone and
probably all telemetry - nounkeyyct=1  or  duplex=0 in rpt.conf.

If you intentions are to run your simplex node as an Allstar GW to the
repeater the repater could be set to have output PL follow input PL. This
works fine without any additional settings.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio  <http://www.crompton.com/hamradio>*